Automate > Traversing Robots

APEX SA Traverse Robots

Traverse movement, our robots can remove parts from difficult molds and reduce the cost of end of arm tooling. Part drop off can be accomplished with 9 programmable cycle positions and 2 areas for a total of 18 points. This capability can be extended to 99 points with a rapid equal pitch setting, and up to 198 points with an extra cross axis setting. Using the 8 spare output and 5 spare input terminals, the SA robot can be connected to conveyors, spray mist, shear cutters, sensors, and other machines to become a complete automation system. The SA robot includes a counter that can be set to drop parts for inspection at regular intervals or to stop operation after a designated quantity has been reached. The robot can also detect reject signals from the injection molding machine and drop reject parts at a designated point.

Features:

• Unique designed wrist rotation device with air shut off pin, excellent for protecting and changing your end of arm tooling.
• 3 Axis linear guide bearing runs smoothly.
• Cable guide protection on all electrical wires and air hoses.
• AC brushless servomotor drive on traverse axis is accurate to within +/-0.1 mm.
• Available with 220V or 110V single phase
• Slimmer 20mm gripper is available for tight mold access

Request Info or Quote

SA Email Quality Literature

SA Print Quality Literature

SA Technical Specifications